Belting Rezina — professional repair and maintenance of conveyor belts
For over 20 years, Belting Rezina has been supplying industrial enterprises in Uzbekistan with high-quality conveyor belts and professional repair and assembly services.
A conveyor is a key element of a production line, and any downtime results in lost time and money. Therefore, we offer prompt repairs, hot and cold vulcanization, ensuring equipment is back in working order as quickly as possible.
Why tape splicing is a critical step
The splice seam is the most stressed point on a conveyor belt. Its quality determines the service life, safety, and stability of the line.
A poor quality seam leads to:
- tape breaks;
- distortions and slippage;
— rapid wear of equipment;
- unscheduled downtime.
That's why we perform jointing only according to technological standards, using modern equipment and proven materials.
Hot vulcanization of conveyor belts
Hot vulcanization is the most reliable method of joining conveyor belts.
Advantages:
- durable monolithic seam;
— the longest service life;
- resistance to heavy loads;
— ability to work at high temperatures;
— suitable for rubber-fabric, rubber-rope and abrasive belts.
Hot vulcanization is used in heavy-duty industries: quarries, cement plants, metallurgy, and mining.
We use industrial-grade pressing equipment and high-quality vulcanization materials.
Cold vulcanization of conveyor belts
Cold vulcanization It is performed without heating and is suitable for quick repairs in conditions where it is important to quickly restore the line's operation.
Advantages:
- high speed of execution;
— possibility of on-site repairs;
- no need to disassemble equipment;
- an economical option with a long service life.
Cold joining is suitable for PVC, PU and some rubber belts, often used in food, packaging and warehouse lines.
When to use hot and cold vulcanization
To ensure the joint is as reliable as possible, it is important to choose the correct connection type.
Hot vulcanization - if:
— the belt operates under high load;
— abrasive materials are transported;
— the temperature on the line is high;
— maximum durability is required.
Cold vulcanization - if:
— need quick repairs;
— minimal production interruption is important;
— the equipment does not allow installation of a press;
— PVC/PU tape is used.
Belting Rezina specialists select the optimal option based on operating conditions and equipment type.
How we splice and repair conveyor belts
The process is carried out strictly according to technological standards:
- Diagnosis of tape condition
We determine wear, damage, and residual strength. - Surface preparation
Cutting, cleaning, grinding, chamfering. - Choice of method (hot or cold vulcanization)
We take into account the type of tape, loads and line speed. - Docking and reinforcement
We use original materials, adhesives and pressing stations. - Quality control
We check the strength of the seam and the stability of the geometry. - Conveyor start-up and load testing
Let's make sure the tape works perfectly.
Advantages of Belting Rubber
Our clients choose us for one reason: we solve problems quickly and reliably.
Our advantages:
— mobile installation teams (we travel throughout Uzbekistan);
— modern equipment for hot and cold vulcanization;
— more than 20 years of experience;
— repair of all types of tapes (PVC, PU, rubber-fabric, heat-resistant, abrasive);
— warranty for work and materials;
- efficiency: minimizing enterprise downtime.
We work with all major sectors: mining, logistics, agriculture, food processing, cement and construction plants.
When conveyor belt repair is required
Most often, clients contact us with the following problems:
- tape cuts;
- punches and ruptures;
— surface wear;
— destruction of the butt joint;
- stratification;
- chipping of edges;
— the appearance of bubbles and swellings.
We perform both local repairs and complete replacement of the tape joint.
Timely connection and repair of conveyor belts is not just equipment maintenance, but a key factor in production stability.
Belting Rezina offers professional repairs, hot and cold vulcanization of belts, ensuring reliability, durability, and minimal downtime. We work to ensure your line operates reliably and smoothly.
Book a specialist visit or a consultation at belting.uz – our team is ready to quickly resolve any issue.
FAQ
Which method is more reliable - hot or cold?
Hot vulcanization provides the strongest and most durable seam.
Is it possible to carry out repairs on site?
Yes, our teams perform cold and hot vulcanization on site.
Do you work with all types of tapes?
Yes, we repair and join PVC, PU, rubber-fabric, heat-resistant and abrasive tapes.
How long does the repair take?
From 30 minutes to several hours, depending on the type of tape and the complexity of the damage.